Vintage Vehicles, Tools and Other Personal Property at Absolute Online Auction

1931 Ford Model A two-door sedan featuring a black exterior finish with visible surface rust. The vehicle has a seized motor. The interior has fabric upholstery on the seating and door panels, showing signs of wear and material degradation. The dashboard includes an ammeter and ignition switch. Exterior components include red-painted wire wheels with whitewall tires and a rear-mounted spare. The sale includes two additional fiberglass front fenders.

1961 Oldsmobile Dynamic 88 sedan, identified by VIN 612M26512. The vehicle is powered by a 394 cubic inch engine and displays an odometer reading of 78,893 miles. Features include a replaced interior and Cragar wheels. The exterior exhibits surface oxidation on the hood and body panels. The engine bay contains a Starfire-branded air cleaner assembly. The trunk compartment is lined with grey carpeting and includes a spare tire.

2003 Ford Mustang GT convertible featuring a 4.6L single overhead cam engine and automatic transmission. The vehicle is finished in red with a tan soft top and a tan leather interior. Features include power windows and a Mach audio system. The odometer displays 43,098 miles. This vehicle is offered by the second owner. Included with the sale are the convertible boot and the original factory stereo unit. VIN: 1FAFP45X63F409811.

2019 Gulf Stream Vintage Cruiser travel trailer features a cream and red exterior finish with matching red wheel accents and chrome hubcaps. The unit is equipped with a power tongue jack, dual propane tanks, and a battery box mounted on the A-frame. Exterior amenities include a retractable awning, pass-through storage compartment, and various utility connections for water, sewer, and electrical power. The interior layout includes a sleeping area with overhead cabinetry, a dinette with bench seating, and a kitchen equipped with a Dometic refrigerator, microwave, and stove. The bathroom contains a toilet, sink, and shower enclosure. Technical specifications indicate a GVWR of 1986 kg (4380 lbs) and a cargo carrying capacity of 394 kg (869 lbs). The trailer is fitted with ST205/75R14D tires.

Rolling chassis assembly originating from a 1985 Chevrolet Corvette C4. The unit includes the primary steel frame structure, front and rear suspension components, steering rack, and brake master cylinder. The assembly is mounted on four wheels with mounted tires. Visible surface oxidation is present on various metal components, including the frame rails and steering linkage. The structure retains remnants of the original body mounting points and chassis bracing.

1961 Chevrolet Corvair Rampside pickup truck offered as a project vehicle. The unit features a modified chassis equipped with a Mustang independent rear suspension. The exterior exhibits significant surface oxidation and paint degradation consistent with long-term storage. The interior retains a bench seat, steering wheel, and dashboard assembly. Included with the vehicle are various loose components and trim pieces housed in cardboard boxes within the cargo bed, including bumpers, grille sections, and lighting housings. The vehicle identification plate is present, indicating a 4600 lb. GVW rating. Documentation for the vehicle is currently in transit.

Roper Whitney Pexto Model 3617 powered beading machine designed for sheet metal fabrication, featuring a 13-inch throat depth and an 18-gauge soft steel capacity. The unit is equipped with a 3/4 horsepower geared head motor, back-geared drive, and bronze-bushed bearings on a floor-mounted frame. Operational controls include forward and reverse settings with a pull-to-start/push-to-stop interface. The system is configured for 3-phase operation and includes an Autogen Model CD 10 electronic 3-phase converter, allowing for operation on single-phase power. The assembly includes a Square D 30-amp general duty safety switch and an Allen-Bradley control box. A selection of assorted forming rolls is included in a separate container. Total weight of the machine is approximately 320 pounds.

American Coolair Type C propeller fan, model CBH36, serial number 042691M238720. The unit features a 36-inch diameter blade assembly and is powered by a Baldor industrial three-phase electric motor, catalog number M3554T. Motor specifications include 1.5 horsepower, 1725 RPM, and 208-230/460 voltage. The assembly includes a belt-driven pulley system and a metal housing frame.

Hydraulic pump motor assembly designed for use with Rotary Lift SPOA10 systems. The unit features a 10,000 lb. capacity rating and is configured for three-phase power operation. Components include a vertical motor housing, a translucent plastic reservoir with a black cover, and an integrated control box with safety warning labels. Identification markings include serial number 200226300021 and model designation UP100K6 5CC REV.